به گزارش خبرگزاری صدا و سیما؛ به نقل از روابط عمومی بنیاد مستضعفان شرکت شیشه مینا نخستین بار در کشور با همکاری یک شرکت خارجی ضمن انتقال دانش فنی موفق به اجرای عملیات بازسازی کوره ذوب به روش تعمیرات گرم شد .

مجید ضیایی مدیرعامل این شرکت گفت: این در حالیست که نخستین بار در کشور توانستیم با همکاری متخصصان خارجی  تعمیر گرم کوره را در کشور عملیاتی کنیم. در این روش بدون توقف تولید، تعمیرات اساسی در یک بازه 17 روزه در دمای 1450درجه سانتیگراد انجام شد و حدود 40 میلیارد ریال در هزینه ها صرفه جویی شد.

وی افزود: به ‌طور متوسط کوره‌های ذوب هر 7 تا 8 سال باید تعمیرات اساسی شود که روش معمول برای این کار این است که کوره خاموش می‌شود.

ضیایی گفت:‌ در این روش قسمت هایی که نیازمند تعمیر است تخریب شده و مجددا بازسازی می‌شود که این سیکل 100 تا 120 روز زمان می‌برد.

وی تصریح کرد: روش سرد علاوه بر تحمیل هزینه‌های بالا باعث می‌شود تولید نیز از دست برود و زیان مضاعفی را در پی داشته باشد.

مدیرعامل شرکت شیشه مینا با بیان این‌که یکی از اهداف ما در همکاری با کارشناسان پرتغالی انتقال دانش روش تعمیر گرم بود، افزود: در صورت تامین تجهیزات مورد نیاز متخصصان ایرانی می‌توانند تعمیر گرم انواع کوره حتی برای سایر صنایع را بدون نیاز به  کارشناسان خارجی‌ها انجام داده و از خروج مقادیر متنابهی ارز بابت این خدمات تخصصی جلوگیری کنند و شرکت ما آمادگی ان را دارد تا تجربیات خود را در اختیار سایر شرکت های این صنعت و سایر صنایع مشابه قرار دهد.

شرکت شیشه مینا  سالانه 36 هزار تن تولید دارد و حدود 20درصد از بازار را در اختیار دارد.


برچسب‌ها: تعمیرات گرم کوره شیشه سازی

تاريخ : جمعه چهاردهم آبان ۱۳۹۵ | 21:41 | نویسنده : علیرضا حسینی |



تاريخ : سه شنبه نوزدهم آبان ۱۳۹۴ | 21:33 | نویسنده : علیرضا حسینی |

Hot Repair

Rat holes hot repair

As a result of continuous R&D on the mechanism of rat holing, Lubisol Ltd. has developed a new method for hot repair of silica crowns.

It was based on the principle, that rat holing can be avoided by a hermetic sealing of the silica crown, preventing the movement and passing of hot flue gases and the condensation of fluxing materials in the loose joints.

Rat holes Hot Repair - Diagram
Furnace - Rat hole

Lubisol Si-Seal is applied as a protection hermetic sealing layer and is very suitable for hot application in the form of plastic balls to fill up the Rat-holes during a hot repair or the expansion joints of a silica crown after heat-up.

The new method offered by Lubisol proved to be a bigsuccess.

The hot repair is carried out by patching and covering of the rat-hole with Lubisol Si-Seal kit and with thin silica plates.


back to top

Lubisol Si-Seal is a hermetic sealing kit, having unique properties. It develops a strong and durable adhesive bond with silica bricks up to 1620 °C, having a coefficient of expansion - very close to the one of the crown bricks.

Lubisol Si-Seal is showing a very high resistance towards alkaline corrosion.

The special thin silica plates used in the new hot repair technology are usually 230 x 114 x 30 mm in size. The two materials – Si-Seal and silica plates are bonded together forming a monolithic composite structure. The thickness of the crown in any corroded area can be increased.

Lubisol - Hot Repair
Lubisol Hot Repair with hanging bricks - diagram

Highly successful hot repair results have been observed on many container glass, float glass, TV glass, boro-silicate and sodium silicate furnace crowns, with no visible signs of new corrosion over the rat holes 6 years after the repair.

Lubisol is offering all materials needed for the repair, together with the know-how and a detailed application technology, adaptable for each individual case.

The method is universal and very suitable for the repair of silica crowns with any kind of rat hole problems melting soda-lime glass, but it proved to be especially helpful for protecting or repairing silica crowns of air-fuel or oxy-fuel furnaces melting boro-silicate, lead, opal or sodium-silicate glasses.

The new hot repair techniques, offered by Lubisol, aresimple and reliable, giving in all cases durable and long lasting solutions at moderate additional expenses.

Different materials thermal expansion
Lubisol - Worldwide insulation application distribution

Successful results have been reported after the application on more than 100 glass furnaces and the new method is now spreading rapidly all over the world.



تاريخ : چهارشنبه بیست و چهارم تیر ۱۳۹۴ | 9:12 | نویسنده : علیرضا حسینی |
 



تاريخ : یکشنبه بیست و یکم تیر ۱۳۹۴ | 19:53 | نویسنده : علیرضا حسینی |



تاريخ : یکشنبه بیست و یکم تیر ۱۳۹۴ | 19:49 | نویسنده : علیرضا حسینی |



تاريخ : پنجشنبه هجدهم تیر ۱۳۹۴ | 20:56 | نویسنده : علیرضا حسینی |
Glass Furnace Back Wall Before Ceramic Welding Repair Glass Furnace Back Wall After Ceramic Welding Repair

Back Wall:
Before Ceramic Welding Repair

Back Wall:
After Ceramic Welding Repair

Glass Furnace Melter Crown Before Ceramic Welding Glass Furnace Melter Crown After Ceramic Welding

Melter Crown:
Before Ceramic Welding Repair

Melter Crown:
After Ceramic Welding Repair

Glass Furnace Regenerator Skew Before Ceramic Welding Glass Furnace Regenerator Skew After Ceramic Welding

Regenerator Skew:
Before Ceramic Welding Repair

Regenerator Skew:
After Ceramic Welding Repair

Glass Furnace Tuckstone Before Ceramic Welding Glass Furnace Tuckstone Ceramic Welding Repair in Progress

Tuckstone:



ادامه مطلب
تاريخ : پنجشنبه هجدهم تیر ۱۳۹۴ | 20:56 | نویسنده : علیرضا حسینی |